Coolest 15 Ardupilots

 

Yosoo Power Module 53V DC BEC APM Power Module With XT60 Connectors ARDUPILOT APM 252 Deans Plug

Yosoo Power Module 5.3V DC BEC APM Power Module With XT60 Connectors ARDUPILOT APM 2.5.2 Deans Plug

Yosoo Power Module 5.3V DC BEC APM Power Module With XT60 Connectors ARDUPILOT APM 2.5.2 Deans Plug - Max input voltage 20v max current sensing 90a, voltage and current measurement configured for 5v adc. Note the power module is only designed to power apm, a rc receiver and apm accessories (gps, 3dr radio) it isnotdesigned to power servos use your aircraft’s own esc/bec for that. Used to detect the battery voltage and the battery current, flight control board receives two signals, calculate the remaining battery power, estimate the remaining flight time. The apm 25 power module is a simple way of providing your apm 25 with clean power from a lipo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable the on-board switching regulator outputs 53v and a maximum of 225a from up to a 4s lipo battery the power module comes completely assembled with deans connectors, and wrapped in shrink tubing for protection. In addition the module also comes with bec function, you can output 53 dc, 3a maximum continuous current for the flight control board to provide a stable power supply another signal cable connectors are used in japan original fittings, non-domestic joint, so apm flight control board and reliable connection between the power supply module.

 

Mini APM V31 ArduPilot Mega External Compass APM Flight Controller

Mini APM V3.1 ArduPilot Mega External Compass APM Flight Controller

Mini APM V3.1 ArduPilot Mega External Compass APM Flight Controller - Can connect to external gps, compass, telemetry system and pm module. 12-ch function interface. Mini apm v31 ardupilot mega external compass apm flight controller. No onboard compass, which makes this version ideal for use with multicopters and rovers. 8-ch output and 8-ch input.

 

Ardupilot Arduplane APM25 26 Airspeed Meter For RC Airplane

Ardupilot Arduplane APM2.5 2.6 Airspeed Meter For RC Airplane

Ardupilot Arduplane APM2.5 2.6 Airspeed Meter For RC Airplane - 6 airspeed meter for rc airplane notejust for reference, not included the white airspeed tube description brand name ardupilot / apm2. The airspeed change with the pressure’s square root. 6 item name airspeed meter airspeed do some helps with heavy wind, slow speed flying and automatic landing working principle upper tube is dynamic (measuring the air pressure of front opening, air is compressed into airspeed tube), the bottom tube is static (measuring the side port airspeed tube) checked operation you can use apm planner or stand on the ground to got the numerical value. If you see the most numerical value is 0,1,2, the occasional rebound to 3 or 4, think it is normal. You will not see this change in flight. 5 2. Zero in the still air and small value oscillation (2-3) are normal. Ardupilot arduplane apm2. 5 2. Package included 1 x airspeed meter. Blowing into a pitot tube to observe the response. So the change under close to zero pressure difference is very small,while in flight need more pressure to generate the estimated speed changes.

 

Z-Standby Ardupilot Arduplane Pitot Tube Air Speed Meter Airspeed Gauge for APM 25 26

Z-Standby Ardupilot Arduplane Pitot Tube Air Speed Meter Airspeed Gauge for APM 2.5 2.6

Z-Standby Ardupilot Arduplane Pitot Tube Air Speed Meter Airspeed Gauge for APM 2.5 2.6 - When you install airspeed sensor with multicopter, using this airspeed tube combo the combo includes two tubes, one dynamic tube one static tube. Package includes, airspeed meterx 1,, pitot tube x 1  . Airspeed do some helps with heavy wind, slow speed flying and automatic landing. Working principle upper tube is dynamic (measuring the air pressure of front opening, air is compressed into airspeed tube), the bottom tube is static (measuring the side    port airspeed tube).

 

APM28 28 Flight Controller Board for Multicopter ARDUPILOT MEGA APM

APM2.8 2.8 Flight Controller Board for Multicopter ARDUPILOT MEGA APM

APM2.8 2.8 Flight Controller Board for Multicopter ARDUPILOT MEGA APM - This revision of the board has onboard compass v28 improved the design, use jumper selection, mag markers found on the board pin plug(near to gps connector), jumper cap for a built-in compass, unplug the jumper cap for external compass. This is the new apm 28 autopilot module, upgraded version 25 26. One of the first open source autopilot systems to use invensense’s 6 dof accelerometer/gyro mpu-6000. The original df13-5p gps interface and sm06b gps interface function reuse, no significance. V252 version of the 33v power supply using tps79133, rated output capacity of only 100ma.

 

Ardupilot Arduplane APM25 26 Airspeed Meter For RC Airplane

Ardupilot Arduplane APM2.5 2.6 Airspeed Meter For RC Airplane

Ardupilot Arduplane APM2.5 2.6 Airspeed Meter For RC Airplane - Ardupilot arduplane apm25 26 airspeed meter for rc airplane. Airspeed do some helps with heavy wind, slow speed flying and automatic landing working principle upper tube is dynamic (measuring the air pressure of front opening, air is compressed into airspeed tube), the bottom tube is static (measuring the side port airspeed tube).

 

RCmall APM 26 ArduPilot Mega External Compass APM Flight Controller with Ublox GPS

RCmall APM 2.6 ArduPilot Mega External Compass APM Flight Controller with Ublox GPS

RCmall APM 2.6 ArduPilot Mega External Compass APM Flight Controller with Ublox GPS - Warranty one year warranty, we provide good customer service,any question please feel free to contact. This is designed to be used with the 3dr ublox gps with compass (see option below), so that the gps/compass unit can be mounted further from noise sources than apm itself. This revision of the board has no onboard compass, which is designed for vehicles (especially multicopters and rovers) where the compass should be placed as far from power and motor sources as possible to avoid magnetic interference (on fixed wing aircraft it’s often easier to mount apm far enough away from the motors and escs to avoid magnetic interference, so this is not as critical, but apm 26 gives more flexibility in that positioning and is a good choice for them, too). This is the new apm 26 autopilot module the sensors are exactly the same as with apm25+, however this version does not have an onboard compass, which makes this version ideal for use with multicopters and rovers. The apm 26 is a complete open source autopilot system and the bestselling technology that won the prestigious 2012 outback challenge uav competition it allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle capable of performing programmed gps missions with waypoints available with top or side connectors.

 

RipaFire APM28 ArduPilot Mega Flight Controller Board for RC Multicopter Quadcopter Airplane

RipaFire APM2.8 ArduPilot Mega Flight Controller Board for RC Multicopter Quadcopter Airplane

RipaFire APM2.8 ArduPilot Mega Flight Controller Board for RC Multicopter Quadcopter Airplane - Apm28 ardupilot mega flight controller board autopilot module. Includes 3-axis gyro, accelerometer and magnetometer, along with a high-performance barometer. Onboard 4 megabyte dataflash chip for automatic datalogging. Optional off-board gps, ublox lea-6h module with compass. Can be ordered with top entry pins for attaching connectors vertically.

 

Horizontal Side Pin APM 28 Flight Controller Board For Multicopter Ardupilot by lanlan

Horizontal Side Pin APM 2.8 Flight Controller Board For Multicopter Ardupilot by lanlan

Horizontal Side Pin APM 2.8 Flight Controller Board For Multicopter Ardupilot by lanlan - The original df13-5p gps interface and sm06b gps interface function reuse, no significance. One of the first open source autopilot systems to use invensense’s 6 dof accelerometer or gyro mpu-6000. 100% brand new and high quality. This revision of the board has onboard compass. This is the new apm 28 autopilot module, upgraded version 25 26.

 

APM26 APM Flight Controller Board w  Top - Connector Connector for ARDUPILOT MEGA 26

APM2.6 APM Flight Controller Board w / Top – Connector Connector for ARDUPILOT MEGA 2.6

APM2.6 APM Flight Controller Board w / Top – Connector Connector for ARDUPILOT MEGA 2.6 - Model number a6h5 package including apm 2. Atmel’s atmega2560 and atmega32u-2 chips for processing and usb functions respectively. Barometric pressure sensor upgraded to ms5611-01ba03, from measurement specialties. 6 main board x1. Use your aircraft’s own esc/bec for that. Includes 3-axis gyro, accelerometer along with a high-performance barometer external compass (optional) onboard 4 mp dataflash chip for automatic datalogging digital compass powered by honeywell’s hmc5883l-tr chip, now included on the main board. Comes pre-soldered (with angle pins) and tested. Note the power module is only designed to power apm, a rc receiver and apm accessories (gps, telemetry radio). It is not designed to power servos. Optional off-board gps, ublox neo6 (select gps option from options) one of the first open source autopilot systems to use invensense’s 6 dof accelerometer/gyro mpu-6000.

 

GoolRC APM26 ArduPilot Mega External Compass APM Flight Controller wUblox NEO-6M GPS

GoolRC APM2.6 ArduPilot Mega External Compass APM Flight Controller w/Ublox NEO-6M GPS

GoolRC APM2.6 ArduPilot Mega External Compass APM Flight Controller w/Ublox NEO-6M GPS - Can be ordered with top entry pins for attaching connectors vertically, or as side entry pins to slide your connectors in to either end horizontally. Optional off-board gps, ublox lea-6m module with compass. Onboard 4 megabyte dataflash chip for automatic datalogging. Includes 3-axis gyro, accelerometer and magnetometer, along with a high-performance barometer. Arduino compatible.

 

Ericoco APM Flight Controller Board w Side-Pin Connectors for ARDUPILOT MEGA 26

Ericoco APM Flight Controller Board w/ Side-Pin Connectors for ARDUPILOT MEGA 2.6

Ericoco APM Flight Controller Board w/ Side-Pin Connectors for ARDUPILOT MEGA 2.6 - Arduino compatible includes 3-axis gyro, accelerometer , along with a high-performance barometer. One of the first open source autopilot systems to use invensense’s 6 dof accelerometer/gyro mpu-6000. Atmel’s atmega2560 and atmega32u-2 chips for processing and usb functions respectively. On-board 4 megabyte dataflash chip for automatic datalogging optional off-board gps. Barometric pressure sensor upgraded to ms5611-01ba03, from measurement specialties.

 

Eztronics Corp APM26 APM Flight Controller Board For Multicopter ARDUPILOT MEGA 26 Version

Eztronics Corp® APM2.6 APM Flight Controller Board For Multicopter ARDUPILOT MEGA 2.6 Version

Eztronics Corp® APM2.6 APM Flight Controller Board For Multicopter ARDUPILOT MEGA 2.6 Version - Comes pre-soldered (with straight pins) and tested. Includes 3-axis gyro, accelerometer along with a high-performance barometer. Onboard 4 mp dataflash chip for automatic datalogging. One of the first open source autopilot systems to use invensense’s 6 dof accelerometer/gyro mpu-6000. Barometric pressure sensor upgraded to ms5611-01ba03, from measurement specialties.

 

Waterwood Power Supply Module wBEC APM2 25 APM Flight Controller ARDUPILOT MEGA APM26

Waterwood Power Supply Module w/BEC APM2 2.5 APM Flight Controller ARDUPILOT MEGA APM2.6

Waterwood Power Supply Module w/BEC APM2 2.5 APM Flight Controller ARDUPILOT MEGA APM2.6 - It isnotdesigned to power servos. The power module comes completely assembled with deans connectors, and wrapped in shrink tubing for protection. 5 power module is a simple way of providing your apm 2. Description the apm 2. Used to detect the battery voltage and the battery current, flight control board receives two signals, calculate the remaining battery power, estimate the remaining flight time. 3v and a maximum of 2. 25a from up to a 4s lipo battery. 5 with clean power from a lipo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. 3 dc, 3a maximum continuous current for the flight control board to provide a stable power supply. Use your aircraft’s own esc/bec for that. The design parameters of voltage and current detector design parameters consistent with 3dr official ground station (mission planer) settings can be set directly refer to the official wiki. Another signal cable connectors are used in japan original fittings, non-domestic joint, so apm flight control board and reliable connection between the power supply module. 3v and 3a max 6-pos df13 cable plugs directly to apm 2. The on-board switching regulator outputs 5. Specifications max input voltage 30v max current sensing 90a size 25219mm net weight 25g voltage and current measurement configured for 5v adc switching regulator outputs 5. In addition the module also comes with bec function, you can output 5. The maximum input voltage 20v, maximum current measurable 90a, to achieve the control panel on battery power and voltage monitoring. 5’s “pm” connector package included 1 x power module with xt60 connectors 1 x cable 150mm note the power module is only designed to power apm, a rc receiver and apm accessories (gps, 3dr radio).

 

QWinOut Ardupilot Arduplane Pitot Tube Special for APM 25 26 Arduplane Airspeed Sensor

QWinOut Ardupilot Arduplane Pitot Tube Special for APM 2.5 2.6 Arduplane Airspeed Sensor

QWinOut Ardupilot Arduplane Pitot Tube Special for APM 2.5 2.6 Arduplane Airspeed Sensor - The new design, installation more convenient. Quantity ardupilot arduplane pitot tube x1.